How to Read Your Zeverlution Inverter | Infinite Energy

Zeverlution

How to read your Zeverlution inverter

 

The Zeverlution inverter is equipped with a text display, three LEDs indicators and a control button.

By pressing the control button, the top line can display the following information:

  • E-today – Daily energy
  • E-total – Energy generated since the inverter has been installed
  • Vpv – DC input voltage DC input voltage
  • Ipv – DC input current
  • Vac – Grid Volt. This should read between 230-252V. If it fluctuates please contact Western Power on 13 13 51.
  • Iac – Present output current
  • Frequency – Grid frequency
  • Model – Type name
  • Set Language – Selected language
  • Version – Firmware version
  • Serial No. – Serial number
  • IP Addr – Combox IP address

The second line will always display the system’s current output.

 

The inverter is equipped with three LED indicators in green, red and yellow.  

Green LED – If the green LED is lit it means the inverter is operating normally.

Yellow LED – If the yellow LED flashes, it simply means the inverter is communicating with other devices

Red LED – If the red LED is lit it means the inverter has stopped feeding power into the grid due to a fault. The corresponding error code will be shown on the display. If this occurs, please call us on 1300 074 669 for assistance.

To arrange a no obligation consultation at your home or office:

Make an enquiry